1-1/4" OD 24" Tube Extension To Accept Swedge Tube

This is a 24" long 1-1/4" diameter aluminum tube with a hole. This tube can be paired with our 1-1/4" OD 24" Long Swedged Aluminum Tube Extension.

This is a 1.25" Diameter Aluminum tube, cut to 24" long. On one end is a hole to accept our T-140 steel spring button (from a swedged pole). This can be used as the last pole or "end pole" in a swedged tube assembly. Note this tube is NOT swedged.

Need qty 25+ but need a different hole size, different length, different diameter, or a different tube finish? Head on over to TestriteOEM for a quote on custom aluminum tubing made to order.

Keep in mind that there is a tolerance +/- on the cutting and the swedging, so assembling multiple sections, the length can vary from the 24" stated. A variance of +/- 1/16" per section is typical. Also keep in mind that this is a thin wall aluminum tube, and that the more sections you assembly together, the more flex/sway the assembly will have. We make no representation that this tubing is right for your application, fully test any assembly in the environment where it will be used to ensure it is safe before use. 1.25" OD is 31.75mm, which makes this an almost 32MM aluminum tube with hole.

Want to build your own 1.25" OD  6 ft swedged aluminum tube as an example? You would buy Qty 1 of this item and Qty 2 of 1-1/4" OD 24" Long Swedged Aluminum Tube Extension. Want the ends to be nicely closed off? Pair with our 1-1/4" Round Tube End Cap.

Part #: 1250STRTHOLE-24-S